Docking To The Finisher - Gestetner B070 Service Manual

1.2.3 DOCKING TO THE FINISHER

[C]
1. Remove the back cover of the finisher (
2. Attach the left docking bracket [A] to the Z-folding unit (
provided with the finisher).
3. Attach the right docking bracket [B] to the Z-folding unit (
provided with the finisher).
4. Attach the rear locking bracket (
• Attach the rear large bracket [C] if the cover sheet feeder is installed.
• Attach the rear small bracket [D] if the cover sheet feeder is not installed.
5. Attach the ground plate [E] to the Z-folding unit (
SM
CÓPIA NÃO CONTROLADA
[A]
[D]
x 2).
3
CÓPIA NÃO CONTROLADA
INSTALLATION PROCEDURE
[B]
B660I101.WMF
x 2).
x 2) (Bracket
x 2). (Bracket
x 2).
[E]
B660