Gestetner B070 Service Manual page 138

TRAY HEATER KITS
⇒
7. Connect both connectors at the rear
side of the machine.
Note: There is no difference between
connectors.
8. Attach the harness cover.
Note: Make sure not to pinch the harness when the cover is attached.
Front view
9. Plug in the connector for the anti-condensation heater to the AC drive board as
shown in Fig.1.
B070/B071
CÓPIA NÃO CONTROLADA
1-104
CÓPIA NÃO CONTROLADA
Rear view
Insert the harness hook
cover here.
Rev. 01/2004
SM