Gestetner B070 Service Manual page 393

Rev. 06/2004
SP Number/Name
2105 001 Correction in Printer Mode
002 Correction in Copy Mode
003 LD0 Power Correction
004 LD1 Power Correction
005 LD2 Power Correction
006 LD3 Power Correction
007 LD4 Power Correction
008 LD5 Power Correction
009 LD6 Power Correction
010 LD7 Power Correction
2111 FCI Shade Detection
001 Matrix Size (600 dpi)
002 Threshold Value (600 dpi)
003 Matrix Size (400 dpi)
004 Threshold Value (400 dpi)
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
If switched ON, this allows each channel
to be adjusted for 1200 dpi print output
with the SP settings below (LD0 ~ LD7).
[0~1 / 1 / 1]
0: OFF, 1: ON
If switched ON, this allows each channel
to be adjusted for copy output with the SP
settings below (LD0 ~ LD7).
[0~1 / 0 / 1]
0: OFF, 1: ON
Correct the power of LD0 after either
SP2105-001 or -002 is switched on.
[-40~+40 / -2 /1]
Corrects the power of LD1 after either
SP2105-001 or -002 is switched on.
[-40~+40 / -2 /1]
Corrects the power of LD2 after either
SP2105-001 or -002 is switched on.
[-40~+40 / +2 /1]
Corrects the power of LD3 after either
SP2105-001 or -002 is switched on.
[-40~+40 / +2 /1]
Corrects the power of LD4 after either
SP2105-001 or -002 is switched on.
[-40~+40 / +2 /1]
Corrects the power of LD5 after either
SP2105-001 or -002 is switched on.
[-40~+40 / +2 /1]
Corrects the power of LD6 after either
SP2105-001 or -002 is switched on.
[-40~+40 / -2 /1]
Corrects the power of LD7 after either
SP2105-001 or -002 is switched on.
[-40~+40 / -2 /1]
Allows shading detection if FCI (Fine
Character Adjustment) smoothing is on.
With this SP switched on, photos and
painted areas are detected, and FCI is
not applied in these areas. FCI is used for
printer mode output only.
[0~128 / 18 / 1]
0: OFF
[0~128 / 4 / 1]
0: OFF
[0~128 / 18 / 1]
0: OFF
[0~128 / 4 / 1]
0: OFF
5-11
CÓPIA NÃO CONTROLADA
Function/[Setting]
B070/B071