Paper Height Sensors, Lift Motor - Gestetner B070 Service Manual

REPLACEMENT AND ADJUSTMENT

3.13 PAPER HEIGHT SENSORS, LIFT MOTOR

[A]
[B]
1. Open the bypass tray. (!3.1)
2. Remove the bypass tray covers. (!3.2)
3. Remove the tray motor. (!3.5)
4. Remove the feed tray. (!3.3)
Paper Height Sensors
1. Paper Height Sensor 1 [A] (hooks x 4,  x 1)
2. Paper Height Sensor 2 [B] (hooks x 4,  x 1)
Lift Motor
1. Remove the bypass tray PCB [C] ( x 11,  x 2, standoffs x 2).
NOTE: Before disconnecting CN704 and CN706, mark either connector with a
marker to make sure that you re-connect them correctly. The shapes of
these connectors are the same and the wires are the same color.
2. Remove screws [D] and [E] to loosen the frame [F].
3. Raise the loosened frame slightly to remove the lift motor [G] ( x 2,  x 1).
B512
CÓPIA NÃO CONTROLADA
[D]
16
CÓPIA NÃO CONTROLADA
[C]
[G]
[E]
[F]
B512R009.WMF
SM