Gestetner B070 Service Manual page 121

Rev. 06/2003
⇒
Two sets of keytops (2 per set, 1 for NA, 1 for EU) are provided for each machine,
but you need to install only one keytop on each machine.
• Install the key labeled "Printer/Other Function" (or its equivalent symbol keytop
for EU) on a machine with the printer/scanner option installed
• Install the key labeled "Other Function" (or its equivalent symbol keytop for EU)
on a machine without the printer/scanner option.
Installation Procedure
CAUTION
Switch the machine off and unplug the machine before starting the
following procedure.
[B]
[C]
[A]
1. Switch the main power switch off.
2. Remove the controller box cover. (
3. Remove the cover [A] from slot A2.
4. Align the PCB with the bottom groove, and push the connection PCB [B] into
the slot.
NOTE: Make sure that the edge of the PCB is in the groove before you push
the card into the machine.
5. Fasten the PCB with the attached screws [C].
SM
CÓPIA NÃO CONTROLADA
INSTALLATION OF MFP CONTROLLER OPTIONS
x7)
1-87
CÓPIA NÃO CONTROLADA
T03040802.WMF
B070/B071