Gestetner B070 Service Manual page 415

Rev. 06/2004
SP Number/Name
4904 023 Pale Mode
024 Generation Mode
4909 Image Processing Through
001 IPU Scan Image Module
002 IPU Plotter Image Module
SP5-nnn Mode
SP Number/Name
5019 Tray Paper Size Selection
002 1st Tray
007 6th Tray
5024 mm / inch Display Selection
5040 Custom Size: Vertical
002 Custom Size: Vertical
5041 Custom Size: Horizontal
002 Custom Size: Horizontal
5047 Reverse Paper Display
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Selects the line width correction level for
Pale mode.
[0~2 / 0 / 1]
0: No processing
1: Low (thin)
2: High (thick)
Selects the line width correction level for
Generation mode.
[0~2 / 0 / 1]
0: No processing
1: Low (thin)
2: High (thick)
DFU
[0~15 / 0 / 1]
DFU
[0~127 / 0 / 1]
Selects the paper size for the 1st tray.
[LT LEF: USA version
A4 LEF: Other versions}
Selects the paper size for the 6th tray.
[LT LEF: USA version
A4 LEF: Other versions}
Selects the unit of measurement.
[0~1 / 0 or 1/ 1]
0: mm (Default for other versions)
1: inch (Default for USA version)
After selection, turn the main power switch
off and on
Adjusts the vertical dimension of custom
size paper for Tray 1. 'Custom size' must
be selected with SP 5019-2.
[210.0~305.0 / 297.0 / 0.1 mm]
Adjusts the horizontal dimension of custom
size paper for Tray 1. 'Custom size' must
be selected with SP 5019-2.
[210.0~439.0 / 210.0 / 0.1 mm]
Determines whether the tray loaded with
paper printed on one side is displayed.
[0~1/0/1]
0: Not displayed
1: Displayed
5-33
CÓPIA NÃO CONTROLADA
Function/[Setting]
Function/[Setting]
B070/B071