Ieee 1394 Kit (B) - Gestetner B070 Service Manual

1.12.5 IEEE 1394 KIT (B581)
Accessories
Description
1. IEEE 1394 Board ...................................................................1
2. 4-Pin Cable ............................................................................1
3. 5-Pin Cable ............................................................................1
Installation
Only one PCI slot (B3) is available for one of these options:
• USB 2.0
• IEEE 801.11b (Wireless LAN)
• IEEE 1394 (FireWire)
If another card is installed in B3, you must remove it before installing IEEE 1394
B581.
1. Switch the machine off.
2. Remove the cover [A] of Slot B3 ( x 2)
3. Insert the IEEE 1394 board [B] into Slot B3 and fasten it with the screws.
4. Switch the machine on and print a configuration page to confirm that the
machine recognizes the installed board for IEEE 1394 (FireWire):
User Tools> Printer Features> List Test Print> Configuration Page
SM
CÓPIA NÃO CONTROLADA
INSTALLATION OF MFP CONTROLLER OPTIONS
[B]
1-83
CÓPIA NÃO CONTROLADA
Q'ty
[A]
B580I107.WMF
B070/B071