Gestetner B070 Service Manual page 126

INSTALLATION OF MFP CONTROLLER OPTIONS
⇒
6. Install the following firmware together as a set:
NCS (NIB): (B0705755B)
Netfile: (B0705756B)
System: (B0705754B)
Webdocbox: (B0705758B)
Important: The function will not work properly unless all versions above are
installed together.
7. After successfully installing the firmware above, turn the main switch OFF/ON.
8. Set SP5836-003 to a value of 1, which will enable the print back-up feature.
9. Set the following SP modes to the values shown:
SP No.
SP5-836 001
SP5-836 002
SP5-836 072
SP5-836 073
10. Set the following SP modes as necessary, in accordance with the customer's
needs.
SP No.
SP5-836 094
SP-5836 098
B070/B071
CÓPIA NÃO CONTROLADA
v.4.15
v3.07.2
v4.01.4
v1.08
Setting SP No.
0 SP5-836 085
0 SP5-836 086
0 SP5-836 091
0
Setting
2 Sets JPEG2000 (J2K) as the file format for documents
copied from the Document Server to Palm2.
Note: Files backed up to Palm2 in J2K format cannot be
edited by other software applications.
0 Sets TIFF as the file format for documents copied from the
Document Server to Palm2.
Note: Use this setting for customers who wish to use other
software applications to edit or apply OCR or other
processing to backed-up files, and who do not mind the loss
in image quality.
1 Applies a correction for dots, rear-side image catching and
background to files copied to Palm2, in order to minimize
the size of the file down to its essential parts.
Note: This is applied to both J2K and TIFF files, but is
particularly useful for customers who wish to copy J2K
documents quickly, as they are normally larger, and who do
not mind the slight loss in image reproduction.
CÓPIA NÃO CONTROLADA
Setting
1
2
50
Comments
1-92
Rev. 07/2003
SM