Gestetner B070 Service Manual page 621

Connecting the Left and Right Sides of the Tray
[A]
[B]
B070D703.WMF
[A]
[D]
Normally the left tray lock lever [A] catches the pin [B] in the right tandem tray.
During copying, if there is no paper in the left tray, the tandem tray connect
solenoid [C] turns on to release the tray lock lever so the left tray separates from
the right tray. Therefore, the left tray can be pulled out to load paper while paper is
still being fed into the machine from the right tray.
When the tandem tray is drawn out fully, the projection [D] pushes up the left tray
lock lever [A] so that both trays separate for easier paper loading.
SM
CÓPIA NÃO CONTROLADA
6-105
CÓPIA NÃO CONTROLADA
PAPER FEED
[C]
B070D704.WMF
B070D654.WMF
B070/B071