Selecting The Staple Supply Name; Enabling Booklet Binding - Gestetner B070 Service Manual

Selecting the Staple Supply Name

Enter the SP mode and execute the following information.
5841* Supply Name Setting
005* Staple Std
006* Staple Bind

Enabling Booklet Binding

To enable booklet binding, you must select the center stapling position.
1. Press the User Tools key.
2. Touch "Copier/Document Server Features".
3. Touch the "Input/Output" tab.
4. Touch any "Stapling Position" button and touch the center (saddle-stitch)
stapling symbol.
5. Exit the User Tools mode. Specify the number of copies, touch the center
stapling symbol on the operation panel, then start the print job.
This SP adjustment is available but not required at installation. Use this SP to fine
adjust the fold/staple position of they are not aligned correctly.
SP6902
Staple Position
in Center
Folding
SP6120 Staple Jogger
Adjustment
SM
CÓPIA NÃO CONTROLADA
3000-SHEET FINISHERS (B468/B469)
These names appear when the user prints the Inquiry List
(B070: Press the Counter key, then press 'Print Inquiry
List', B064/B065: Press the Inquiry button in the initial
User Tools screen).
Enter the name of the staples in use for normal stapling
(not booklet stapling). This setting should be done for both
the B468 and B469.
Enter the name of the staples in use for booklet stapling
(saddle-stitching). This setting is required only for the
B468 for booklet finishing.
Use this SP to fine adjust the fold and staple positions if they
are not aligned correctly. See "5. Service Tables".
Allows fine adjustment of the staple unit jogger fences for
different paper sizes, if required. For details, see "4. Service
Tables".
1-53
CÓPIA NÃO CONTROLADA
B070/B071