Gestetner B070 Service Manual page 363

SMC Report Error Code: 3013
Definition [B]
Mandolin does not respond, the HDD device remains BUSY for more than 31 s, or
the BUSY signal does not drop within 6 s after the diagnostic command is issued to
the HDDs.
Possible Causes
• One or both HDDs defective
• HDD connector loose or defective
• Controller defective
SMC Report Error Code: 3014
Definition [B]
Error returned from HDD in response to the self-diagnostic command, Mandolin
could not be located due to a read/write error at the HDD register.
Possible Causes
• One or both HDDs defective
SMC Report Error Code: 3023
Definition [B]
Mandolin does not respond, the HDD device remains BUSY for more than 31 s, or
the BUSY signal does not drop within 6 s after the diagnostic command is issued to
the HDDs.
Possible Causes
• One or both HDDs defective
• HDD connector loose or defective
• Controller defective
SMC Report Error Code: 3024
Definition [B]
Error returned from HDD in response to the self-diagnostic command, Mandolin
could not be located due to a read/write error at the HDD register.
Possible Causes
• One or both HDDs defective
SM
CÓPIA NÃO CONTROLADA
4-43
CÓPIA NÃO CONTROLADA
SERVICE CALL CONDITIONS
B070/B071