Gestetner B070 Service Manual page 94

PUNCH UNIT (B377)
[C]
B377I203.WMF
[E]
B377I106.WMF
8. Remove the shipping bracket [A] ( x 2).
9. Position the 2 mm spacer [B] and secure the punch unit ( x 2).
10. Secure the punch unit at the front with the shoulder screw ( x 1 [C]).
11. Connect the harnesses [D] and clamp them as shown.
12. Slide the hopper [E] into the machine.
13. Fasten the two 1 mm spacers [F] to the rear frame. These may be used during
future adjustments.
NOTE: The spacers are used to adjust the horizontal positioning of the holes.
14. Reassemble the finisher and check the punch operation.
B070/B071
CÓPIA NÃO CONTROLADA
[A]
[B]
[F]
1-60
CÓPIA NÃO CONTROLADA
[D]
B377I105.WMF
SM