Registration – Side-To-Side - Gestetner B070 Service Manual

Registration – Side-to-Side
Do the parallel image adjustment after the side-to-side registration adjustment.
Using SP Mode
1. Check the side-to-side registration for each paper feed station using the
Trimming Area Pattern, and adjust them using the following SP modes if
necessary.
1st paper feed
2nd paper feed
3rd paper feed
(Optional PFU tray 1)
4th paper feed (LCT)
5th paper feed (LCT)
6th paper feed (LCT)
7th Tray (Bypass)
Duplex
Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins using the Trimming
Area Pattern, and adjust them using the following SP modes if necessary.
Trailing edge
Right edge
Leading edge
Left edge
SM
CÓPIA NÃO CONTROLADA
COPY IMAGE ADJUSTMENT: PRINTING/SCANNING
SP mode Specification
SP1002 1
SP1002 2
SP1002 3
SP1002 4
2 ± 1.5 mm
SP1002 5
SP1002 6
A: Leading Edge Registration
SP1002 7
B: Side-to-side Registration
SP1002 8
SP mode Specification
SP2101 2 3 ± 2 mm
SP2101 4 More than 0.5 mm
SP2101 1 4 ± 2 mm
SP2101 3 2 ± 1.5 mm
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
3-149
CÓPIA NÃO CONTROLADA
B
A
B070R633.WMF
D
C
B
B070R634.WMF
B070/B071
A