Attaching The Extensions - Gestetner B070 Service Manual

COVER INTERPOSER TRAY (B470)

Attaching the Extensions

[E]
[D]

CAUTION
Make sure that the finisher is disconnected from the main machine and that
the copier is switched off and unplugged before starting the following
procedure.
1. Attach the three shoulder screws [A] ( x 3).
2. Remove the ground plate [B] from the finisher and save the screws
3. Attach the bottom plate [C] ( x 2, M3 x 6) then re-attach the ground plate to
the bottom plate ( x 2) with the screws removed in Step 2.
4. Attach the bottom front cover extension [D] ( x 2, M4 x 8).
5. Attach the top front cover extension [E] ( x 2, M4 x 8).
6. Attach the rear cover extension [F] ( x 2, M3 x 6).
B070/B071
CÓPIA NÃO CONTROLADA
1-70
CÓPIA NÃO CONTROLADA
[A]
[F]
[B]
[C]
B470I003.WMF
SM