Controller Box Door Removal - Gestetner B070 Service Manual

1.2.3 CONTROLLER BOX DOOR REMOVAL

NOTE: Do this procedure only if the machine is too large to pass through a narrow
door or passageway.
[D]
[B]
B070R155.WMF
1. Remove the lock screw [A] ( x 1) and swing the door open.
2. Remove the connector plate [B].
3. Remove the clamps [C] ( x 2).
4. Disconnect the upper connectors [D] ( x 7).
5. Disconnect the lower connectors [E] ( x 2).
6. Remove the upper hinge cover [F] ( x 1).
7. Remove the lower hinge cover [G] ( x 1).
8. Lift the door off the hinges and remove it.
SM
CÓPIA NÃO CONTROLADA
[C]
1-23
CÓPIA NÃO CONTROLADA
COPIER (B070/B071)
[A]
[F]
[E]
[G]
B070R166.WMF
B070/B071