Gestetner B070 Service Manual page 85

3. Attach the cushion [A] to the right side of the upper cover.
NOTE: If you are installing the cover interposer tray, do not attach the cushion
here. Attach it to the cover interposer tray. The cover interposer tray
must be installed before you dock the finisher and tray to the main
machine. For details, see the Cover Interposer Tray B470 installation
instructions.
4. Remove the screw [B] to release the lock lever [C] ( x 1).
5. Slowly and carefully, to avoid bending the entrance guide plates of the finisher,
push the finisher against the side of the machine until the brackets enter the
slots.
6. Using the screw [B] removed above, secure the lock lever [C] ( x 1).
7. Connect the plug [D] of the finisher power cord to the connector on the
machine.

CAUTION
Always move the finisher slowly to avoid bending the entrance guide
plates. Bent guide plates could interfere with paper transport from the
finisher to the machine.
SM
CÓPIA NÃO CONTROLADA
3000-SHEET FINISHERS (B468/B469)
[A]
[C]
[B]
1-51
CÓPIA NÃO CONTROLADA
[D]
B468I004.WMF
B070/B071