Gestetner B070 Service Manual page 79

[B]
[D]
[E]
18. Attach the 4 clamps [A] to the holes in the frame.
19. Connect the cable harness connectors [B] to the bypass tray at the top ( x 4).
20. Connect the cable harness to the bypass tray main board [C] ( x 3). Working
from bottom to top, match the shape of the connector to the slot, and connect
to:
• CN531
• CN532
• CN530
NOTE: Insert the connectors gently. If at first you cannot insert the connector,
reverse it and try again.
21. Fasten the cable harness [D] to the frame with the 4 clamps attached above.
22. Open the 3 harness clamps [E] (2 above and 1 to the left) of the control board
then secure the harness cable
CAUTION: Make sure that the cable harness is securely clamped at the 7
clamps. If the cable harness is loose, this could interfere with the
moving parts inside the LCT.
23. Re-attach the rear cover.
SM
CÓPIA NÃO CONTROLADA
[A]
[C]
1-45
CÓPIA NÃO CONTROLADA
BYPASS TRAY (B512)
[B]
B512I008.WMF
B070/B071