4. DETAILS
4.1 STAPLING Z-FOLDED PAPER
Here is the operation sequence for jogging and stapling Z-folded sheets:
①
The lower jogger fence lifts to receive the Z-folded sheets.
②
The top fence moves down, to the horizontal position.
③
A sheet of paper goes into the stapler tray.
④
The positioning roller turns when each sheet is fed to the stapler tray.
⑤
Each sheet is fed down against the lower jogger fence to align the bottom edge.
After the set number of sheets come in, the jogger top-fence motor switches on and
⑥
lowers the top fence against the top of the stack. This aligns the stack for stapling.
⑦
The bottom fence motor lowers the aligned stack to the stapling position.
⑧
The stapler staples the stack.
SM
CÓPIA NÃO CONTROLADA
⑦
7
CÓPIA NÃO CONTROLADA
DETAILS
⑥
⑧
B706