Service Tables - Gestetner B070 Service Manual

5. SERVICE TABLES

Two SP codes have been added for the Z-folding unit.
Use these SPs to adjust the locations of the first fold and the second fold.
The illustration shows the position of the sheet while it goes through the lower exit
rollers after it has been folded.
SP6122 001-008 Fine Adjustment – 1st Fold Position
[-4 ~ +4/0/ 0.2 mm]
Adjusts the position of the first fold [A] to decrease or increase the
distance (
fold [C].
SP6122 009-016 Fine Adjustment – 2nd Fold Position
[-4 ~ +4/0/ 0.2 mm]
Adjusts the position of the 2nd fold [C] to decrease or increase the
length (
fold.
SM
CÓPIA NÃO CONTROLADA
[D]
[A]
L1
[B]
[C]
A
) between the leading edge [B] and the crease of the 2nd
L1
) of the sheet between the trailing edge [D] and the 2nd
23
CÓPIA NÃO CONTROLADA
SERVICE TABLES
A
B660