Gestetner B070 Service Manual page 371

SC868 SD Card Error 3: SD Card Access
Definition [B]
An error is returned during an operation using an SD card. Debug console
acquires more detailed information about the error.
Possible Causes
• SD card not inserted completely
• SD card defective
• Controller board defective
NOTE: If this SC code is displayed again after cycling the machine off and on, use
another SD card. If this does not solve the problem, replace the controller
board.
SC870: Address Book Data Error
Definition [B]
Address book data stored on the hard disk was detected as abnormal when it was
accessed from either the operation panel or the network.
The address book data cannot be read from the HDD or SD card where it is stored,
or the data read from the media is defective.
Possible Causes
• Software defective; switch off/on, and change the controller firmware if the
problem is not solved
• HDD defective
Recovery
• Execute SP5846 050 (UCS Settings – Initialize all Directory Info.) to initialize
all address book data.
•
Initialize the user information with SP5832 006 (HDD Formatting– User
Information 1) and SP5832 007 (HDD Formatting – User Information 2).
•
Replace the HDDs.
• Boot the machine from the SD card.
SC880: Media Link Board Error
Definition [B]
A request for access to the Media Link Board was not answered within the
specified time.
Possible Causes
• Media Link Board defective
SM
CÓPIA NÃO CONTROLADA
4-51
CÓPIA NÃO CONTROLADA
SERVICE CALL CONDITIONS
B070/B071