Gestetner B070 Service Manual page 1008

Tech Service Bulletin No. B070/B071 – 009 Reissue
UP Mode
:
Users need to perform the necessary settings (Capture server IP address, etc.) from inside:
[Use Tools/Counter] [System Settings]
1. On the copier go to; user tools, system settings, file transfer, Capture server IP address, to enter
eCabinet IP address.
2. On the copier go to; user tools, system settings, key op tools, next button, capture priority and set to
customer's preferences.
3. On the copier go to; user tools, system settings, timer settings and set to customer's preference.
EXPLANATION:
•
"OFF": Normal mode - eCabinet window does not pop up and there is no capture to eCabinet.
•
Default "OFF": - eCabinet window pops up, select ecab user, and choose capture "ON" or OFF".
•
Default "ON": - eCabinet window pops up, user must be selected, and capture mode is "ON" or OFF".
•
"ON": - eCabinet window pops up, user must be selected, and capture mode is "ON" and cannot be
changed.
•
"ON" (NO DISPLAY): - eCabinet window and capture happens behind the scenes. Default user setup on.
Example:
Problem:
The customer wants to make copies and send an electronic copy to the eCabinet, but the customer does not
want every copy to be sent to the eCabinet.
Solution:
The capture priority for copier mode should be set to Default "ON."
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Page 3 of 4