Gestetner B070 Service Manual page 91

[F]
[A]
B478I006.WMF
9. Attach the shift tray [A] ( x 4) (M3 x 8).
10. Open the front door of the finisher, and remove the screw from the locking
lever, then pull out the locking lever [B].
11. Align the finisher on the joint brackets, and lock it in place by pushing in the
locking lever [B].
NOTE: Before securing the locking lever, make sure that the top edges of the
finisher and the copier are parallel from front to rear as shown [C].
12. Set the leveling shoes [D] (x4) under the feet [E], then level the machine.
13. Secure the locking lever [B] ( x 1) and close the front door.
14. Connect the finisher cable [F] to the copier.
SM
CÓPIA NÃO CONTROLADA
[C]
1-57
CÓPIA NÃO CONTROLADA
3000 SHEET FINISHER (B478)
B478I534.WMF
[B]
[E]
[D]
B070/B071