Gestetner B070 Service Manual page 59

[A]
2. Use SP5804 097 (Upper Bottle) and SP5804 098 (Lower Bottle) to close the
toner caps, then remove the toner bottles from the bank.
3. Remove the rear upper and rear lower covers.
4. Remove the left upper cover, left lower cover, and right upper cover.
5. Remove the two screws [A] securing the toner supply cylinder.
6. Cover the end of the toner transport coil tube [B] with a plastic bag.
7. Execute SP5804 070 (Output Check – Toner Bank Motor) and SP5804 071
(Output Check – Toner Supply Coil Clutch) to actuate the toner bank motor and
toner supply coil clutch for 2 minutes and remove all toner in the supply hose.
8. Re-install all removed parts except the toner bottles.
9. Make sure that three tubes are connected to the toner supply cylinder when
putting it back.
SM
CÓPIA NÃO CONTROLADA
[B]
1-25
CÓPIA NÃO CONTROLADA
COPIER (B070/B071)
B070I901.WMF
B070/B071