Bypass Tray Pcb - Gestetner B070 Service Manual

3.6 BYPASS TRAY PCB

1. Remove the tray motor. (!3.5)
2. Remove the bypass tray PCB [A] ( x 11,  x 2, standoffs x 2).
NOTE: Before disconnecting CN704 and CN706, mark either connector with a
marker to make sure that you re-connect them correctly. The shapes of
these connectors are the same and the wires are the same color.
SM
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
[A]
9
CÓPIA NÃO CONTROLADA
B512R011.WMF
B512