Gestetner B070 Service Manual page 988

Rev. 06/2003
1.12 JOGGER UNIT B513
The Jogger Unit B513 is installed above the shift tray of the 3000 Sheet Finisher
B478.
Paper Size
Paper Weight
Weight
Dimensions (W x D x H)
Power Supply
Power Consumption
1.13 COVER INTERPOSER TRAY B470
Paper Separation
Paper Sizes
Paper Weight
Capacity
Power Supply
(from main machine)
Power Consumption
Dimensions (W x D x H)
Weight
⇒
1.14 CONNECTION KIT B328
Copy Speed
B070 (90 cpm)
B071 (105 cpm)
Operation
Master Machine
Slave Machine
Document Server (Printing)
Master Machine
Slave Machine
Connection Cables
Length (x1)
Length (x2)
Length (x3)
SM
CÓPIA NÃO CONTROLADA
A3 SEF, B4 SEF, 11" x 17" SEF
A4 LEF, B5 LEF, 8 " x 11" LEF
1/2
2 2
52 g/m ~ 216 g/m
Less than 1.7 kg (3.7 lb.)
125 mm x 450 mm x 100 mm
5" x 17.7" x 4"
DC 24 V, DC 5V (From Finisher)
24 W
FRR System with Feed Belt
A3 ~ A5, 11" x 17" ~ 5
1/2
2
64 ~ 216 g/m
2
200 sheets (80 g/m )
24 V ±10%, 5 V ±5% (From Finisher)
Less than 48 W
500 x 620 x 200 mm
19.7" x 24.4" x 7.9"
Less than 12 kg (26.4 lb.)
2 Connected:
2 Connected
Prints simultaneously with scanning, same as a stand-alone
machine.
Starts printing after the 2nd set is printed on the master
machine.
Note: Start time may be slower, due to sizes of images.
Press the Start key to begin printing, same as a stand-alone
machine.
Starts printing after the 2nd set is printed on the master
machine.
Note: Start time may be slower, due to sizes of images.
4. 5 m 1 cable, no repeater hub
9 m 2 cables, 1 repeater hub for connection.
13.5 m 3 cables, 2 repeater hubs for connection.
7-17
CÓPIA NÃO CONTROLADA
SPECIFICATIONS
" x 8 "
1/2
180 cpm
210 cpm
B070/B071