4. Press Execute, then follow the prompts on the display to complete the
procedure.
5. Make sure that you perform the following settings:
• Do the printer and scanner registration and magnification adjustments.
(
3-17).
• Execute SP2115 – Main Scan Beam Pitch Adjustment
• Do the touch screen calibration (
• Referring to the SMC data lists, re-enter any values, which had been
changed from their factory settings.
• Execute SP 3001 002 – ID Sensor Initial Setting
• Switch SP 3901 001 (Auto Process Control Setting) to 1 (On), if you wish
auto process control to be used.
6. Check the copy quality and the paper path, and do any necessary adjustments.
SM
CÓPIA NÃO CONTROLADA
Section 3 "Touch Screen Calibration").
5-93
CÓPIA NÃO CONTROLADA
MEMORY ALL CLEAR: SP5801
B070/B071