Gestetner B070 Service Manual page 654

FUSING
SP1902 001 displays the web consumption. When the web consumption exceeds
the value set with SP1-902-4 (Web Near End), the machine indicates web near-
end on the operation display.
The machine still operates while the actuator [A] remains above the web end
sensor [B] undetected. The actuator arm of the actuator remains in contact with the
supply roller [C] and gradually lowers as the amount of web on the supply roller
grows smaller as it is fed to the take-up roller [D] above.
When the web runs out, the actuator drops into the web end sensor at [E] and the
sensor signal to the CPU displays SC550 on the operation panel display. In this
condition, a technician must install a new oil supply and cleaning web, and then
reset SP1902 001 to 0 to clear SC550.
B070/B071
CÓPIA NÃO CONTROLADA
6-138
CÓPIA NÃO CONTROLADA
[D]
B070D555.WMF
[C]
[A]
[B]
[E]
SM