Gestetner B070 Service Manual page 405

Rev. 06/2004
SP Number/Name
2975 Toner Recycle Cut Counter
001 ON Counter
002 OFF Counter
2980 Toner Consumption Pattern Interval
SP3-nnn Processing
SP Number/Name
3001 ID Sensor Initial Setting
001 ID Sensor PWM Setting
002 ID Sensor Initialization
3103 ID Sensor Output Display
001 Vsg
002 Vsg Initial
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Determines how often all recycled toner is
discarded. The purpose of this feature is
to periodically remove all recycled toner
contaminated with paper dust.
[0~999 / 200 / 1 K copies]
This setting determines when the toner
separation solenoid closes the shutter
and shunts all toner to the waste toner
collection bottle. For details, see "Toner
Recycling" in Section 6.
This setting determines how long all toner
is shunted to the waste toner collection
bottle (no recycling).
[0~255 / 25 / 1 K copies]
This setting determines when the toner
separation solenoid opens the shutter
and toner recycling starts.
Use this SP to improve drum cleaning if
required. It determines how long the drum
turns after the ID sensor pattern is
created before the toner consumption
pattern is created.
[0~30 / 0 / 1 minutes] DFU
0: No toner consumption pattern created.
This SP mode recovers the machine when
an SC condition occurs because ID Sensor
Initial Setting is not done after doing an
NVRAM Clear or replacing the NVRAM.
Reset this SP to the factory setting in this
case.
[0~255 / 62 / 1]
The PWM data is stored when ID Sensor
Initial Setting is done.
Performs the ID sensor initial setting. The ID
sensor output for the bare drum (VSG) is
adjusted to 4.0 ± 0.2 V.
This SP mode should be performed: 1) After
replacing or cleaning the ID sensor, 2) After
replacing the NVRAM or doing an NVRAM
clear.
Displays the current value of the ID sensor
output after checking the bare drum surface.
Displays Vsg when the Vsp adjustment is
done.
5-23
CÓPIA NÃO CONTROLADA
Function/[Setting]
Function/[Setting]
B070/B071