Gestetner B070 Service Manual page 71

11. Move the LCT to the side of the copier and connect the four connectors [A]
12. Fasten the ground wire screw [B] ( x 1).
13. Align the LCT on the joint pins, and dock the LCT with the right side of the
copier.
14. Tighten the lock screw to attach the LCT to the copier ([D] in step 10).
NOTE: If the lock lever is not seated correctly, pull the spring loaded lock lever
forward and release to lock it into the groove.
15. Insert the leveling shoes (x 3) under the leveling feet and level the LCT.
16. Attach the appropriate decals to the trays.
SM
CÓPIA NÃO CONTROLADA
[B]
1-37
CÓPIA NÃO CONTROLADA
LCT (B511)
[A]
B511I106.WMF
B070/B071