Tray Lift Switch, Feed Tray - Gestetner B070 Service Manual

3.3 TRAY LIFT SWITCH, FEED TRAY

[A]
[C]
[F]
1. Open the bypass tray. (!3.1)
2. Remove the covers. (!3.2)
3. Remove the tray lift switch cover [A].
NOTE: Use the tip of a screwdriver to release the hook [B] holding the plate.
4. Remove the tray lift switch [C] ( x 1, hooks x 2, standoff x 1,  x 1).
5. Disconnect the lower limit sensor connector [D].
6. Disconnect the paper width switch [E] ( x 1, harness clamps x 2).
7. Remove the feed tray [F] ( x 4).
NOTE: Under the tray, disengage the lift motor coupling [G]. Be sure to re-
engage the coupling when re-attaching the feed tray.
SM
CÓPIA NÃO CONTROLADA
[B]
[D]
5
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
B512R006.WMF
[G]
[E]
B512