BYPASS TRAY (B512)
[B]
24. Remove the tape from the sponge strip and attach the strip [A] to the top left
cover of the bypass tray. Position the strip in the center above the three roller
housings [B].
NOTE: The sponge strip prevents paper or other objects from accidentally
falling between the output tray and the left cover.
25. Attach the end fence (follow the instructions on the decal attached to the top of
the bypass tray).
NOTE: Open the LCT front door and hang tab sheet fence on the hooks [C] on top
of the LCT tab fence. When feeding tab sheets from the bypass tray, follow
the decal instructions on the tab fence to install it.
B070/B071
CÓPIA NÃO CONTROLADA
[A]
B512I012.WMF
1-46
CÓPIA NÃO CONTROLADA
[C]
B512I009.WMF
SM