Gestetner B070 Service Manual page 971

Rev. 06/2003
3.13.2 TONER BANK UNIT
[A]
B070R974.WMF
NOTE: Work carefully to avoid spilling toner during removal.
1. Execute SP5804 097 (upper bottle) and 098 (lower bottle) to close the caps,
then remove the toner bottles from the bank.
2. Upper rear and lower rear covers ( 3.1.4).
3. Open the controller box door (
4. Left lower cover, right upper cover ( 3.1.2, 3.1.3).
5. Two screws [A] of the toner supply cylinder. (
NOTE: Work carefully to avoid spilling toner.
6. Cover the end of the toner transport coil tube [B] with a plastic bag.
NOTE: Do not to bend the toner transport coil tube [B]. If it is bent, this can
cause the coil inside to be overloaded, locked, or damaged. SC592 will
be displayed, and the coil (screw) inside should be replaced.
⇒
7. Switch on the machine and execute SP2226 to discharge toner from the toner
bank.
8. Turn off the main switch and unplug the power cord.
9. Toner waste bottle. ( 3.13.1)
SM
CÓPIA NÃO CONTROLADA
[B]
x 3) ( 3.1.4)
3-125
CÓPIA NÃO CONTROLADA
TONER BANK
x 2, tubes x 3)
B070/B071