Lct Tray Heater (Option) - Gestetner B070 Service Manual

LCT (B511)

1.4.3 LCT TRAY HEATER (OPTION)

Installation

CAUTION
Before doing this procedure, turn off the main switch and unplug the copier
power cord.
[F]
[B]
1. Remove the LCT unit from the main copier.
2. Remove the LCT right cover ( x 6).
3. Attach the two condensation heaters [A] ( x 2 each)
4. Attach the heater cover [B] ( x 2)
5. Attach the two harness clamps [C].
6. Lead the heater harnesses [D] through the harness clamps.
7. Push the connectors [E] through the holes.
8. Connect the interface harness connectors [F] to the connectors pushed through
the holes.
B070/B071
CÓPIA NÃO CONTROLADA
[A]
1-38
CÓPIA NÃO CONTROLADA
[E]
[D]
[C]
B511I131.WMF
SM