Preventive Maintenance - Gestetner B070 Service Manual

2. PREVENTIVE MAINTENANCE

2.1 PM PARTS
The quantities (K=1,000) given as the PM interval show the number of prints or
copies unless written differently. These numbers are based on the PM counter.
Symbol Key for PM Tables
I: Inspect. Clean, replace, or lubricate as necessary.
C: Cleaning necessary.
R: Replacement necessary.
L: Lubrication necessary.

WARNING
Switch off the main power switch and disconnect the machine's main
power cord before you do a procedure in this section.
2.1.1 Z-FOLDING UNIT TYPE 2105
As Needed
Drive Rollers
Idle Rollers
Anti-Static Brush
Bushings
Sensors
SM
CÓPIA NÃO CONTROLADA
C Dry cloth.
C Dry cloth.
C Dry cloth. Replace every 1000 K.
L Silicone Oil
C Dry cloth.
9
CÓPIA NÃO CONTROLADA
PM PARTS
Note
B660