Gestetner B070 Service Manual page 210

DEVELOPMENT AND TONER SUPPLY
6. Disconnect the connectors [A].
7. Disconnect the toner suction hose [B] and set it on the hook provided to keep
the hose elevated so it does not leak toner.
8. Grasp the knob [C] of the development unit and pull it out of the machine.
NOTE: 1) To prevent scratches on the drum, press the development unit to the
right while pulling it out.
2) After installing the development unit, be sure to re-connect the
connectors (x2) and suction hose.
3) When cleaning the unit with a vacuum cleaner, keep the
development unit connector as far as possible away from the
development unit.
B070/B071
CÓPIA NÃO CONTROLADA
B070R970.WMF
[B]
3-52
CÓPIA NÃO CONTROLADA
[A]
[B]
B070R969.WMF
SM