Gestetner B070 Service Manual page 107

Right Front Corner Plate (B478 only)
1. Temporarily attach the screw [A] (M4 x 8) with about two turns to fasten to the
panel at the right front corner.
NOTE: The hole is not visible because it is covered with tape. Just punch the
screw through the hole.
2. With the clamp [B] under the edge of the corner, align the cutout [C] in the right
front corner plate with the screw, then snap it into position.
3. With a long screwdriver inserted into the plate cutout [C], tighten the screw to
fasten the right front corner plate.
SM
CÓPIA NÃO CONTROLADA
[A]
1-73
CÓPIA NÃO CONTROLADA
COVER INTERPOSER TRAY (B470)
[C]
B470I008.WMF
[B]
B070/B071