DRUM UNIT
3.7.6 CLEANING BRUSH
1. Cleaning blade. (!3.7.5)
2. Coupling gear [A] ( x 1).
3. Bushing [B] ( x 1).
4. Pull the cleaning brush shaft to the rear to release the cleaning brush [C], then
remove the cleaning brush.
NOTE: Never touch the cleaning brush with bare hands.
5. After replacement, clean the ID sensor surface.
6. Execute SP3001 002 (ID Sensor Initial Settings – ID Sensor Initialization) to
initialize the sensor.
B070/B071
CÓPIA NÃO CONTROLADA
[C]
CÓPIA NÃO CONTROLADA
3-48
[B]
[A]
B070R204.WMF
SM