REPLACEMENT AND ADJUSTMENT
3.7.1 STACKING ROLLE/ROLLER DRAG MOTORS, RETURN HP
SENSOR
[A]
1. Do the procedures to remove the front door and all covers, with the exception
of the left lower cover and top cover (labeled [C]: and [E]).
NOTE: Be sure to lower the shift tray by pulling the gear toward you. The shift
tray must be down.
2. Remove the tray shift motor. (! 3.7)
3. Remove the left stay [A] (x 3)
4. Unhook the stay at top [B].
5. Remove the shift tray mounting plate [C] ( x 2).
B478
CÓPIA NÃO CONTROLADA
[B]
20
CÓPIA NÃO CONTROLADA
[C]
B478R526.WMF
SM