Gestetner B070 Service Manual page 431

Rev. 06/2004
SP Number/Name
5856 002 Remote ROM Update/Local
port
5857 Save Debug Log
001 On/Off (1:ON 0:OFF
002 Target (2: HDD 3: SD Card)
005 Save to HDD
006 Save to SD Card
009 HDD to SD Card (Latest 4 MB) Takes the most recent 4 MB of the log
010 HDD to SD Card Latest 4 MB
Any Key)
011 Erase Debug Data From HDD
012 Erase Debug Data From SD
Card
5857 013 Free Space on SD Card
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
When set to "1" allows reception of
firmware data via the local port (IEEE
1284) during a remote ROM update.
[0~1 / 0 / 1]
0: Not allowed
1: Allowed
This setting is reset to zero after the
machine is cycled off and on
Switches on the debug log feature. The
debug log cannot be captured until this
feature is switched on.
[0 ~ 1 / 0 / 1]
0: OFF
1: ON
Selects the destination where the
debugging information generated by the
event selected by SP5858 will be stored if
an error is generated
[2 ~ 3 / 2 / 1]
2: HDD
3: SD Card
Specifies the decimal key number of the
log to be written to the hard disk. ( 5.16)
Specifies the decimal key number of the
log to be written to the SD Card. ( 5.16)
written to the hard disk and copies them to
the SD Card. ( 5.16)
A unique file name is generated to avoid
overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD
Card. 4 MB segments can be copied one
by one to each SD Card.
Takes the log of the specified key from the
log on the hard disk and copies it to the SD
Card. ( 5.16)
A unique file name is generated to avoid
overwriting existing file names on the SD
Card. Up to 4 MB can be copied to an SD
Card. 4 MB segments can be copied one
by one to each SD Card. This SP does not
execute if there is no log on the HDD with
no key specified.
Erases all debug logs on the HDD
Erases all debug logs on the SD Card. If
the card contains only debugging files
generated by an event specified by
SP5858, the files are erased when SP5857
010 or 011 is executed.
To enable this SP, the machine must be
cycled off and on.
Displays the amount of space available on
the SD card.
5-49
CÓPIA NÃO CONTROLADA
Function/[Setting]
B070/B071