B706 Service Manual Differences - Gestetner B070 Service Manual

1. B706 SERVICE MANUAL DIFFERENCES

The following is a summary of the differences between the SR840 and SR841 (all
other sections are identical to the B478). For information regarding sections not
detailed see the B478, 3000 Sheet Finisher Section. The revised sections appear
on the following page.
IMPORTANT NOTES:
1. To install the Z-Folding Unit (B660) on the enhanced version of the B070/B071
mainframe, it is necessary to first install the new 3000 Sheet Finisher (B706).
2. To install the Z-Folding Unit (B660) unit on existing B070/B071 machines it will
be necessary to update to the latest firmware version. These details will be
announced as soon as they become available.
INSTALLATION:
Auxiliary trays and their holders have been added to the accessory list.
NOTE: As mentioned in the Operating Instructions, auxiliary trays should be
attached on top of the proof/shift tray to ensure proper stacking.
REPLACEMENT AND ADJUSTMENT:
The replacement procedures for new components have been added.
DETAILS:
Explanations for the Z-folding stapling mechanism and new electrical components
have been added.
SM
CÓPIA NÃO CONTROLADA
B706 SERVICE MANUAL DIFFERENCES
1
CÓPIA NÃO CONTROLADA
B706