Gestetner B070 Service Manual page 975

SERVICE PROGRAM MODE TABLES
SP4-nnn Scanner
SP
4008 Scanner Sub Scan Magnification
4010 Scanner Leading Edge Registration
4011 Scanner Side-to-Side Registration
⇒
4012 Scanner Erase Margin
001
002
003
004
⇒
4013 Scanner Free Run
001
002
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
Leading Edge
Trailing Edge
Right
Left
Scanner Free Run: Lamp ON
Scanner Free Run: Lamp OFF
CÓPIA NÃO CONTROLADA
Function/[Setting]
Adjusts the magnification in the sub scan
direction for scanning. If this value is
changed, the scanner motor speed is
changed. ( 3-17)
[-0.9~+0.9 / 0 / 0.1 percent]
•
Use the " / *key to enter the minus ( –)
before entering the value.
Setting a lower value reduces the motor
speed and lengthens the image in the sub
scan direction (paper direction). Setting a
larger value increases the motor speed
and shortens the image in the sub scan
direction.
Adjusts the leading edge registration for
scanning. ( 3-17)
[-9.0~+9.0 / 0 / 0.1 mm]
•
Use the " / *key to enter the minus ( –)
before entering the value.
A minus setting moves in the direction of
the leading edge. A larger value shifts the
image away from the leading edge, and a
smaller value shifts the image toward the
leading edge.
Adjusts the side-to-side registration for
scanning. ( 3-17)
[-3.0~+3.0 / 0 / 0.1 mm]
(–): The image disappears at the left side.
(+): The image appears at the left side.
•
Use the " / *key to enter the minus ( –)
before entering the value.
Adjusts the erase margin for scanning.
The leading, trailing, right and left
margins can be set independently.
Do not adjust this unless the user wishes
to have a scanner margin that is greater
than the printer margin.
[0~9.0 / 0.5 / 0.1 mm]
Allows scanner free running with the
exposure lamp on.
Allows scanner free running with
exposure lamp off.
5-24
Rev. 06/2003
SM