Gestetner B070 Service Manual page 631

Jam Removal at Paper Registration
[B]
[F]
[G]
If a sheet misfeeds between the vertical transport rollers and the registration
rollers, the next sheet is already on its way up from the paper tray, and must be
stopped, or there will be a pile-up of jammed paper.
To prevent this, when the registration sensor is not activated at a certain jam check
timing, the lower paper guide plate [A] automatically opens.
Guide plate solenoid [B] turns on ! Lever [C] raises ! Lock lever [D] (on the
guide plate) releases from pin [E] (on the rear side frame) ! Guide plate [A] falls
open ! Paper coming along the feed path is diverted to the duplex tray.
Actuator [F] on the guide plate activates the guide plate position sensor [G] when
the guide plate opens.
The user must remove jammed paper in the feed path, the sheet in the duplex tray,
and manually close the guide plate.
To prevent the guide plate from being left open, if the guide plate position sensor is
activated, copying is disabled and a caution is displayed on the LCD panel.
SM
CÓPIA NÃO CONTROLADA
[C]
[A]
6-115
CÓPIA NÃO CONTROLADA
PAPER FEED
[D]
[E]
B070D597.WMF
B070/B071