Web Roller And Filter - Gestetner B070 Service Manual

3.11.5 WEB ROLLER AND FILTER

[B]
[A]
B070R511.WMF
1. Remove the oil supply and cleaning web unit. (!3.11.1)
2. Place the unit on a flat surface as shown.
3. Cover [A] ( x 2).
4. Note the positions of the blue shaft bushings at the rear and front.
• No e-rings or clips are used to hold these bushings in place.
• The rear side of the cover holds the two rear bushings in place.
• The bushings at the front are held in place by two tabs at the front.
5. Filter [B].
6. Bushing of the web supply roller shaft [C].
7. Oil supply and cleaning web shaft [D] (gear x 1, bushing x 1).
NOTE: Raise the small tab on the gear to release it.
SM
CÓPIA NÃO CONTROLADA
[C]
3-107
CÓPIA NÃO CONTROLADA
FUSING UNIT
[D]
B070R512.WMF
B070/B071