Gestetner B070 Service Manual page 430

SERVICE PROGRAM MODE TABLES
SP
5852 006
007
008
009
010
011
012
013
5853 Stamp Data Download
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
SMTP Auth. Encryption
POP before SMTP
POP Server Name
POP Port Number
POP User Name
POP Password
POP Auth. Encryption
Time out Setting for POP
CÓPIA NÃO CONTROLADA
Function/[Setting]
Sets encryption method for the transfer
password in SMTP validation.
[0~2 / 0 / 1]
0: Auto. Allows three methods for
encryption in SMTP validation: LOGIN,
PLAIN, or CRAM-MD5.
1: Off. Allows two methods for SMTP
validation: LOGIN, PLAIN.
2: On. Allows only one method for SMTP
validation: CRAM-MD5.
A flag that determines whether the POP
server is connected before connecting to
the SMTP server.
[0~1 / 0 / 1]
POP
0: OFF
1: On
Post Office Protocol (POP)servers are
computers that receive mail using SMTP.
The mail includes a setting to ensure that it
is directed to the POP server. POP servers
are used when the user is not permanently
connected to the Internet.
Sets the POP server name.
Sets the POP port number.
[1～65535/110/1]
Set the POP user name.
Set the POP password.
Sets the encryption method for the
password when 5852 POP Before SMTP is
in use.
[0~2 / 0 / 1]
0: Auto. Allows two methods for
encryption: APOP and normal
encryption to match the settings of the
POP server.
1: Off. Allows only normal encryption.
2: On. Allows only APOP encryption.
Sets the wait time after POP validation
until the SMTP mail is sent.
[0~10000/ 300 /1 ms]
Use this SP to download the fixed stamp
data stored in the controller firmware and
save it on the HDD. This SP can be
executed as many times as required. This
SP must be executed after replacing or
formatting the hard disks.
This SP can be executed only with the
hard disks installed. ( 5.10.5)
5-48
Rev. 06/2004
SM