3.7.2 QUENCHING LAMP
1. Remove the drum. (!3.7.1)
NOTE: Wrap a protective sheet or a few sheets of paper around the drum to
protect it from light.
2. Pull up the quenching lamp connector cable [A] slightly, then release the hook
[B] at the center of the quenching lamp.
NOTE: Do not pull the wire too strongly.
3. Disconnect [C].
SM
CÓPIA NÃO CONTROLADA
[C]
[A]
3-41
CÓPIA NÃO CONTROLADA
DRUM UNIT
[B]
B070R202.WMF
B070/B071