Gestetner B070 Service Manual page 390

SERVICE PROGRAM MODE TABLES
SP
1906 001 Duplex Stop Position - Right
1907 Paper Feed Timing Adjustment
001 Tray 1
002 Tray 2
003 Tray 3
004 Tray 4 (LCT Tray 1)
005 Tray 5 (LCT Tray 2)
006 Tray 6 (LCT Tray 3)
007 Tray 7 (Bypass Tray)
008 Translucent Sheets
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
5-8
CÓPIA NÃO CONTROLADA
Function/[Setting]
Changes the paper stop position in the
duplex unit after passing duplex transport
sensor 2. DFU
[-10~+10 / 0 / 2 mm]
Specifies when to stop the feed clutch
once a sheet of paper reaches the feed
sensor and switches it on.
[0~1000 / 0 / 100 ms]
This SP mode is used as a multi-feed
countermeasure. However, copy (print)
speed is slightly reduced.
Rev. 06/2004
SM