Gestetner B070 Service Manual page 395

Rev. 06/2004
SP Number/Name
2201 003 Transparencies
004 ID Sensor Development Potential
005 Image Area (Low Speed)
006 ID Sensor Pattern (Auto Process
Control OFF/Low Speed)
007 Transparencies (Low Speed)
008 ID Sensor Development Potential
(Low Speed)
2207 Toner Supply
001 Forced Toner Supply
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Adjusts the development bias for copying
on Transparencies.
[-200~-800 / -400 / 10 V]
Adjusts the development potential for
making the ID sensor pattern for VSP
measurement when the auto process
control is set on.
[140~380 / 240 / 10 V]
Adjusts the development bias for copying
in low speed mode.
B070: [-200~800 / -480 / 10 V]
B071: [-200~800 / -450 / 10 V]
Adjusts the development bias for making
the ID sensor pattern for VSP
measurement when the auto process
control is set to off and the machine is in
low speed mode.
B070: [-200~800 / -370 / 10 V]
B071: [-200~800 / -350 / 10 V]
Adjusts the development bias for copying
onto Transparencies in low speed mode.
B070: [-200~800 / -370 / 10 V]
B071: [-200~800 / -350 / 10 V]
Adjusts the development potential for
making the ID sensor pattern for VSP
measurement when the auto process
control is set on and the machine is in the
low speed mode.
B070: [0~200 / 30 / 10 V]
B071: [0~200 / 50 / 10 V]
This value is subtracted from the setting
of SP2201 004. For example, if 004 is set
at 240 and 008 set at 60, then the value
is adjusted to 180 (240 – 60 = 180).
Forces toner supply for 10 seconds from
the toner bank through the toner hopper
to the development unit. Press Start to
force toner supply.
This mode finishes automatically after the
toner supplied 10 times. Use to determine
if toner supply is operating correctly. If
forcing toner supply with this SP does not
darken the image, then toner supply is
not operating correctly.
5-13
CÓPIA NÃO CONTROLADA
Function/[Setting]
B070/B071