Gestetner B070 Service Manual page 264

FUSING UNIT
[B]
B070R510.WMF
9. Hot roller [A] (gear x 1,  x 2, bushings x 2, bearings x 2).
CAUTION: Handle the hot roller carefully to avoid damaging its soft surface.
10. Lubricate the inner and outer surfaces of the bushings [B] with BARRIERTA
L55/2 grease before re-installing the hot roller.
Re-assembly
• Before re-installing the hot roller, make sure that the end with long part of the
shaft [C] is at the rear on the gear side.
• When re-installing bearings and bushings, make sure that the flanges for the
bearings and bushings are placed on the outside.
B070/B071
CÓPIA NÃO CONTROLADA
3-106
CÓPIA NÃO CONTROLADA
[A]
[B]
[C]
SM