Completing The Installation - Gestetner B070 Service Manual

COPIER (B070/B071)

Completing the Installation

1. Set the required paper sizes for all paper trays.
• Tray 1: Use SP5019 002 (Tray Paper Size Selection – 1st Tray)
• Trays 2 and 3: Use the paper size dial
• LCT, top two trays, bypass tray, and cover interposer: Position the fences
correctly
• LCT, bottom tray: Use SP5019 007 (Tray Paper Size Selection – 6th Tray)
2. Attach the appropriate paper size decal to each tray (decals are provided in the
accessories bag).
3. Attach the face-up decal to the ADF.
4. Check copy quality and machine operation.
NOTE: The first time the ADF is used, dust on the ADF transport belt will
transfer to the exposure glass. To remove this dust, perform SP6008-3
(DF Output Check) for 3 minutes, then check the exposure glass for
dust and remove it.
5. Initialize the electrical total counter with SP7825 (Total Counter Clear).
6. Input the supply name with SP5841 (Supply Name Settings) 001 (Toner), 005
Staples), and 006 (Staple Bind (for booklet staples).
7. Install the stamp data (SP5853).(!5.10.5)
B070/B071
CÓPIA NÃO CONTROLADA
1-22
CÓPIA NÃO CONTROLADA
SM