Gestetner B070 Service Manual page 976

Rev. 06/2003
SP
5857 Save Debug Log
001
⇒
002
005
006
009
010
011
012
SM
CÓPIA NÃO CONTROLADA
Number/Name
On/Off (1:ON 0:OFF
Target (2: HDD 3: SD Card)
Save to HDD
Save to SD Card
HDD to SD Card (Latest 4
MB)
HDD to SD Card Latest 4 MB
Any Key)
Erase Debug Data From
HDD
Erase Debug Data From SD
Card
5-49
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Function/[Setting]
Switches on the debug log feature. The
debug log cannot be captured until this
feature is switched on.
[0 ~ 1 / 0 / 1]
0: OFF
1: ON
Selects the destination where the
debugging information generated by the
event selected by SP5858 will be stored
if an error is generated
[2 ~ 3 / 2 / 1]
2: HDD
3: SD Card
Specifies the decimal key number of the
log to be written to the hard disk.
( 5.16)
Specifies the decimal key number of the
log to be written to the SD Card. ( 5.16)
Takes the most recent 4 MB of the log
written to the hard disk and copies them
to the SD Card. ( 5.16)
A unique file name is generated to avoid
overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD
Card. 4 MB segments can be copied one
by one to each SD Card.
Takes the log of the specified key from
the log on the hard disk and copies it to
the SD Card. ( 5.16)
A unique file name is generated to avoid
overwriting existing file names on the SD
Card. Up to 4 MB can be copied to an
SD Card. 4 MB segments can be copied
one by one to each SD Card. This SP
does not execute if there is no log on the
HDD with no key specified.
Erases all debug logs on the HDD
Erases all debug logs on the SD Card. If
the card contains only debugging files
generated by an event specified by
SP5858, the files are erased when
SP5857 010 or 011 is executed.
To enable this SP, the machine must be
cycled off and on.
B070/B071